Hyundai 2008 Elantra Manuel d'utilisateur télécharger pdf (Page 227)

Driving your vehicle

265

The cruise control system allows you to

program the vehicle to maintain a con-

stant speed without pressing the acceler-

ator pedal.

This system is designed to function

above approximately 25 mph (40 km/h).

✽✽

NOTICE

During normal cruise control operation,

when the SET switch is activated or

reactivated after applying the brakes,

the cruise control will energize after

approximately 3 seconds. This delay is

normal.

To set cruise control speed:

1. Push the CRUISE ON-OFF button on

the steering wheel to turn the system

on. The CRUISE indicator light in the

instrument cluster will illuminate.

2. Accelerate to the desired speed, which

must be more than 25 mph (40 km/h).

CRUISE CONTROL SYSTEM (IF EQUIPPED)

WARNING

• If the cruise control is left on,

(CRUISE indicator light in the

instrument cluster illuminated)

the cruise control can be

switched on accidentally. Keep

the cruise control system off

(CRUISE indicator light OFF)

when the cruise control is not in

use, to avoid inadvertently set-

ting a speed.

• Use the cruise control system

only when traveling on open

highways in good weather.

• Do not use the cruise control

when it may not be safe to keep

the car at a constant speed, for

instance, driving in heavy or

varying traffic, or on slippery

(rainy, icy or snow-covered) or

winding roads or over 6% up-hill

or down-hill roads.

(Continued)

(Continued)

• Pay particular attention to the

driving conditions whenever

using the cruise control system.

• During cruise-speed driving of a

manual transaxle vehicle, do not

shift into neutral without

depressing the clutch pedal,

since the engine will be over-

revved. If this happens, depress

the clutch pedal or release the

cruise control ON/OFF switch.

OHD056010L

1 2 ... 222 223 224 225 226 227 228 229 230 231 232 ... 359 360

Commentaires sur ces manuels

Pas de commentaire