Hyundai 2008 Elantra Manuel d'utilisateur télécharger pdf (Page 214)

513

Driving your vehicle

✽✽

NOTICE

Alwqys come to a complete stop before

shifting into D (Drive).

3 (Third gear)

Use for towing a trailer during hill climb-

ing or to use engine braking downhill.

"3" automatically shifts between 1st, 2nd

and 3rd gears. This means that no shift-

up to 4th gear is performed. However, the

shift-up to 4th gear is done when the car

speed exceeds a certain value to prevent

the engine from over-revving. Manually

move the selector to "D" when returning

to normal driving condition.

2 (Second gear)

Use for driving on a slippery road, hill

climbing or engine braking downhill. "2"

automatically shifts between first and

second gears.

This means that no shift-up to 3rd gear is

performed. However, the shift-up to third

gear is done when the car speed

exceeds a certain value to prevent the

engine from over-revving. Manually move

the selector to "D" returning to normal

driving condition.

L (Low gear)

Use for driving up a very steep grade or

for engine braking when descending

steep hills. When downshifting to "L", the

transaxle will temporarily remain in sec-

ond gear until the vehicle has slowed

enough for low gear to engage. Do not

exceed 30 mph (50 km/h) in low gear.

"L" shifts to 1st gear only. However, shift

up to 2nd is performed when the car

exceeds a certain speed and, as speed

increases, the transaxle will shift up to

3rd gear to prevent over-revving the

engine.

✽✽

NOTICE

• For smooth and safe operation,

depress the brake pedal when shifting

from "N" (Neutral) position or "P"

(Park) position to a forward or "R"

(Reverse) gear.

• Fully depress the brake pedal in order

to move the shift lever from the "P"

(Park) position to any of the other

positions.

• It is always possible to shift from "R",

"N", "D", "3", "2", "L" position to

"P" position. The vehicle must be

fully stopped to avoid transaxle dam-

age.

CAUTION

• Shift into "R" and "P" position

only when the vehicle has com-

pletely stopped.

• Do not accelerate the engine in

reverse or any of the forward

positions with the brakes applied.

• Always apply the footbrake when

shifting from "P" or "N", to "R",

"D","3", "2" or "L" position.

• Check the automatic transaxle

fluid level regularly, and add fluid

as necessary.

See the maintenance schedule for

the proper fluid recommendation.

1 2 ... 209 210 211 212 213 214 215 216 217 218 219 ... 359 360

Commentaires sur ces manuels

Pas de commentaire