Hyundai 2008 Elantra Manuel d'utilisateur télécharger pdf (Page 293)

717

Maintenance

Check the condition and connections of

all cooling system hoses and heater

hoses. Replace any swollen or deterio-

rated hoses.

The coolant level should be filled

between F and L marks on the side of the

coolant reservoir when the engine is

cool.

If the coolant level is low, add enough

specified coolant to provide protection

against freezing and corrosion. Bring the

level to F, but do not overfill. If frequent

additions are required, see an authorized

Hyundai dealer for a cooling system

inspection.

Recommended engine coolant

• Use only soft (de-mineralized) water in

the coolant mixture.

• The engine in your vehicle has alu-

minum engine parts and must be pro-

tected by an ethylene-glycol-based

coolant to prevent corrosion and freez-

ing.

• DO NOT USE alcohol or methanol

coolant or mix them with the specified

coolant.

• Do not use a solution that contains

more than 60% antifreeze or less than

35% antifreeze, which would reduce

the effectiveness of the solution.

For mixture percentage, refer to the fol-

lowing table.

OHD076008

5°F (-15°C) 35 65

-13°F (-25°C) 40 60

-31°F (-35°C) 50 50

-49°F (-45°C) 60 40

Ambient

Temperature

Mixture Percentage (volume)

Antifreeze

Water

1 2 ... 288 289 290 291 292 293 294 295 296 297 298 ... 359 360

Commentaires sur ces manuels

Pas de commentaire