Hyundai H-CDM8043 Manuel d'utilisateur télécharger pdf (Page 14)

Setting other characteristics

During FM mode, keep pressing and holding for more than 2 seconds the SEL button to turn the setting TA on,

then press it shortly and repeatedly to select other settings: PI, RETUNE, MASK, BEEP, SEEK, DSP, LOUD,

STEREO, DX/LOCAL, VOL.

a. TA (Traffic Announcement) mode

To determine what action will the radio take if the newly tuned station does not receive TP (Transport

Program) information for 5 seconds. Rotate the VOLUME knob to select the desired mode: TA ALARM and

TA SEEK.

- TA SEEK

When newly tuned station does not receive TP information for 5 seconds, the radio retunes to next station

which has not the same station (PI – Program Information) as the last station, but has the TP information.

When TP information gets lost at the current station for retune time which is set by RETUNE SHORT (60

seconds) or RETUNE LONG (90 seconds), the radio starts to retune to next same PI station. When same

PI station does not catch in 1 cyclic search, the radio retunes to next station with TP information.

- TA ALARM

During searching the radio does not retune but the double beep sound (alarm) is output.

b. PI mode

“PI” is referred to “Different PI (Program Information) with same AF (Alternative Frequency)”.

If a car cruises that critical area back and forth, an oscillation phenomenon can be occurred, because the

different PI code can be receive from a same AF. You can select PI SOUND or PI MUTE.

- PI SOUND

When above different PI sound (DIP) is heard once in a while, the DIP's sound will be heard for less than

1 second.

- PI MUTE

Under above same situation, a mute sound will be heard for less than 1 sec.

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 62 63

Pas de commentaire

Hyundai H-CDM8043 Manuel d'utilisateur Page 14