Hyundai HX200L-2000 Manuel d'utilisateur télécharger pdf (Page 65)

3. Instructions

3-7

3.4. How to Install

NOTE:

Before starting to unpack and install the robot, read the safety regulations and other

instructions very carefully..

Warning:

The installation shall be made by qualified installation personnel and should conform

to all national and local codes.

When unpacking the robot, check if it has been damaged during transporting or

unpacking. In addition, strictly keep the following installation instructions because

installation method and foundation are very important to maintain a good robot

performance.

3.4.1. Operating Conditions

(1) Ambient temperature should range from 0℃ to 45℃.

(2) Ambient humidity should range from 20% to 85% RH, without dew

condensation.

(3) Less dust, oil, or moisture.

(4) No flammable, corrosive liquid or GAS.

(5) No impact and shacking.

(6) No electrical noise generator near the robot.

(7) If the robot is not immediately installed, keep it in a dry area at an ambient

temperature between -15 and 40 . ℃∼ ℃

1 2 ... 60 61 62 63 64 65 66 67 68 69 70 ... 146 147

Pas de commentaire

Hyundai HX200L-2000 Manuel d'utilisateur Page 65